게시판
Inclinometer Casing Test Report
작성자
newgeovan
작성일
2018-07-29 12:13
조회
566
This is an Inclinometer Casing Test Report by Chemical Laboratory for Dong-A Geovan Co.,Ltd produced ABS Inclinometer Casing.
Shortly called Geovan Inclinometer casing\'s sprial control limit is less than 0.3Degree per 3meter.
There are three models availble ;
Outer Diameter 60mm : Recommendation for Slurry wall construction or assuming small lateral displacement area.
Outer Diameter 70mm : This is standard inclinometer casing for suitable for various civil engineering project.
Outer Diameter 85mm : Recommendation for assuming large lateral projects.
Or Mainly used for In Placement Inclinometer projects.
In case of deep BH installation, The long size couplings such as 380mm or 400mm should be installed.
Assuming large settlement volume, then the telescopic couplings strongly recommended.
Please ask us if you need detail technical solution.
株式會社 東 亞 地 盤
DONG-A GEOVAN CO.,LTD
Optimized measurement, Proven safety.
Shortly called Geovan Inclinometer casing\'s sprial control limit is less than 0.3Degree per 3meter.
There are three models availble ;
Outer Diameter 60mm : Recommendation for Slurry wall construction or assuming small lateral displacement area.
Outer Diameter 70mm : This is standard inclinometer casing for suitable for various civil engineering project.
Outer Diameter 85mm : Recommendation for assuming large lateral projects.
Or Mainly used for In Placement Inclinometer projects.
In case of deep BH installation, The long size couplings such as 380mm or 400mm should be installed.
Assuming large settlement volume, then the telescopic couplings strongly recommended.
Please ask us if you need detail technical solution.
株式會社 東 亞 地 盤
DONG-A GEOVAN CO.,LTD
Optimized measurement, Proven safety.
전체 0