게시판
Practical Solutions to Improve Piezometer Response and Measurement Reliability
작성자
newgeovan
작성일
2026-03-21 13:52
조회
482
When installing a vibrating wire piezometer in the field, it is often difficult to clearly distinguish pressure increases and decreases that reflect both actual groundwater level fluctuations and the behavior induced by embankment loading.
This issue is typically attributed to the improper formation of an impermeable bentonite seal within the borehole. As a result, changes in pore water pressure are not accurately transmitted to the sensor. In particular, time lag in response and pressure attenuation frequently occur when bentonite sealing is not properly executed. These problems are often caused by slurry coating the filter zone or by excessively thick impermeable layers that hinder pressure transmission.

# Vibrating Wire Piezometer
# Pore Pressure
# Soft Ground Monitoring
# Soft Ground Improvement
# Soft Soil Stabilization
This issue is typically attributed to the improper formation of an impermeable bentonite seal within the borehole. As a result, changes in pore water pressure are not accurately transmitted to the sensor. In particular, time lag in response and pressure attenuation frequently occur when bentonite sealing is not properly executed. These problems are often caused by slurry coating the filter zone or by excessively thick impermeable layers that hinder pressure transmission.

# Vibrating Wire Piezometer
# Pore Pressure
# Soft Ground Monitoring
# Soft Ground Improvement
# Soft Soil Stabilization
